Built to operate at its best at all times and in any
place, the 930 NSF range is automatically reliable, without any use
frequency limits. In the event of a power-cut, operation is assured
100% for thirty minutes by an optional buffer battery with controlled
recharging.
The control board inside the gearmotor facilitates and
speeds up installation, at lower cost. Its compact size makes it
ideal for residential applications with gates weighing up to 600 kg.
The 740, 24volt Operator has the option to install a
battery backup unit. The unit can be installed internally within the
operator OR a larger capacity battery backup kit can be fitted
external to the operator. Max Weight of Gate = 400 Kg.
The Faac 770 system is suitable for gates weighing up
to 500Kg each leaf. The system is semi commercial and is rated to
open/close the gates up to 25 times per hour. Each gate can be up to
3 Mtrs wide. An electric lock should be fitted where each gate is
wider than approx 2.2 Mtrs.
The Faac 413 Operator has been developed for gates up
to 2.5 Mtrs per leaf and does NOT NEED an open or close stop in the
ground. The mechanical open and closing positions are adjustable
directly by mechanical stops on the operator, the system is very
effective on "Ranch Type" gates as no straining of the gate is caused
in the open or close position.
The 415 Operator can move gate leafs up to 4 Mtrs each (Use of a lock
for closing is required).
Another feature of the operators is the smoothness in operation and
lack of noise or vibration
The FAAC 412 is the most practical and economical
choice for residential gates up to 1.8 metres in length per leaf. The
412 actuator is non-reversing and, therefore, does not require
electric locks and bolts.
